|
  bht-0030YO
This is a rear trunk for a gas or electric scooter.
This item
includes all hardware necessary for mounting.RED BLUE
|
|
1PCS 15$
|
|
5-50 PCS 12$
|
|
-100PCS 8$
|
|
+100PCS
6$
|
|
|
 bht-0045LAN
FEU AVANT A LED + CLAXO + SPEEDOMETRE LCD + JAUGE BATTERIE
24/36V
|
|
1PCS 39$
|
|
5-50 PCS 22 $
|
|
-100PCS 18 $
|
|
+ 100PCS 12 $
|
|
|
 
 
bht-00
2 - 3 - 4 - 5 Wire Ignition Switch
Specifications
2 Wire Ignition Switch with 2 keys.
NOTE: Key removable in
off position only.
|
|
1PCS 5$
|
|
5-50 PCS
|
|
-100PCS
|
|
+ 100PCS
|
|
|
 bht-00
INLINE Charging Port (3 Pin)
3 pin INLINE charger port with 10 inches of wire attached.
|
|
1PCS 5$
|
|
5-50 PCS
|
|
-100PCS
|
|
+ 100PCS
|
|
|
 bht-00
PC Style Charging Port (3 Pin)
PC Style charging port with 3 pins and 10 inches of wire with modular
connector.
Includes charging port cover as shown in picture.
|
|
1PCS 5$
|
|
5-50 PCS
|
|
-100PCS
|
|
+ 100PCS
|
|
|
  bht-00
3 Pin INLINE Plug
3 pin INLINE battery charger plug with solder connections
|
|
1PCS 5$
|
|
5-50 PCS
|
|
-100PCS
|
|
+ 100PCS
|
|
|
 bht-002 Pin Modular Connector
|
3 Pin Modular Connector
|
4 Pin Modular Connector
|
|
6 Pin Modular Connector
|
9 Pin Modular Connector
|
|
Includes both male and female plastic connectors and metal pins.
|
|
|
1PCS 1$
|
|
5-50 PCS
|
|
-100PCS
|
|
+ 100PCS
|
|
|
 bht-005YO
Outer
Diameter: 140mm / 5-1/2 inches
Inner Diameter: 54mm / 2-1/8
inches
54 Tooth Sprocket for 8mm (T8F) Chain
Shipping Weight: 1.5
lbs.
|
|
1PCS 9$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
2$
|
|
|
 bht-005YO
Outer
Diameter: 165mm / 6-3/8 inches
Inner Diameter: 54mm / 2-1/8
inches
63 Tooth Sprocket for 8mm (T8F) Chain
Shipping Weight: 1.3 lbs.
|
|
1PCS 9$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
2$
|
|
|
 bht-00YO
Axle adjuster for rear wheel of electric or gas scooter.
10mm inner
diameter hole for axle.
|
|
1PCS 3$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00YO
Dimensions
Rotor
Dimensions
Outer Diameter: 2-3/4'' / 70mm
Inner
Diameter: 1-3/8'' / 35mm
Brake Housing
Outer Diameter:
3-1/2'' / 89mm
|
|
1PCS 9$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00YO
Rotor
Dimensions
Outer Diameter:2-3/8'' / 60mm
Inner Diameter:
1-3/8'' / 35mm
Brake Housing
Outer Diameter: 3-1/8'' /
79mm
|
|
1PCS 8$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
bht-00YO
Rotor
Dimensions
Outer Diameter:3-1/2'' / 90mm
Inner Diameter:
1-3/8'' / 35mm
Brake Housing
Outer Diameter: 4-1/2'' /
114mm
|
|
1PCS 9$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00YO
Disc Brake Caliper (Right)
Designed for use with 120mm, 140mm and 160mm disk brake rotors.
|
|
1PCS 9$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
|
|
|
 bht-00YO
120mm disk brake rotor with 3 hole mounting pattern.
Direction indicator
arrow on surface of rotor.
Outer Diameter: 120mm
Inner
Diameter: 26mm
Thickness: 3mm
Bolt hole spacing:
33mm
|
|
1PCS 9$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00YO
160mm disk brake rotor with 6 hole mounting pattern.
Outer Diameter: 160mm
Inner Diameter: 38mm
Thickness: 2mm
Bolt Patterm: 6 bolt holes, 49mm diagonal
spacing
|
|
1PCS 9$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00
Chain is
13'' long folded in half.
8mm chain has a 5/16'' spacing between each link.
|
|
1PCS 7$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
1,80$
|
|
|
 bht-004YO
#25 chain has a 1/4'' spacing between each link and is approximately 1/4''
wide
|
|
1PCS 7$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
1,5$
|
|
|
 bht-00
Specifications
Pin Spacing: 12.7mm / 1/2 inch
Chain is 24 inches long folded in half.
Includes one master link.
428 chain has a 1/2 inch spacing between each link.
|
|
1PCS 15$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00
Specifications
(45 Links)
Chain is 22-1/2 inches long folded in half.
Includes one master link.
420 chain has a 1/2 inch spacing between each link.
Dimensions
Pin Spacing: 12.7mm / 1/2 inch
Roller Diameter: 7.7mm /
0.30 inches
|
|
1PCS 15$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00Y
Outer
Diameter: 1.0'' / 25mm
Inner Diameter: 0.315'' / 8mm
This 11
tooth sprocket fits most MY1016 style electric scooter motors.
This sprocket
is designed for use with #25 chain.
|
|
1PCS 6$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-006Y
Mounting Bracket for 250 / 450 Watt GEARED Motor (Style:
MY1018Z)
|
|
1PCS 10$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
1,5$
|
|
|
 bht-00500YONG
MOTEUR BRUSHLESS TYPE PHANTOM 24/36V 250/300W 48v 1000w
|
|
5-50 PCS 102 $
|
|
-100PCS 89 $
|
|
+ 100PCS 80 $
|
|
|
 bht-00300LAN
MOTEUR BRUSHLESS 24/36V 250/300W
|
|
5-50 PCS 122 $
|
|
-100PCS 92 $
|
|
+ 100PCS 82 $
|
|
|
 bht-00300HZ
MOTEUR BRUSHLESS AVEC BOITE REDUCTION
24/36V 250/300W
|
|
5-50 PCS 122 $
|
|
-100PCS 99 $
|
|
+ 100PCS 82 $
|
|
|
 bht-00300HZ
MOTEUR BRUSHLESS AVEC BOITE REDUCTION
24/36V 250/300W
|
|
5-50 PCS 122 $
|
|
-100PCS 99 $
|
|
+ 100PCS 82 $
|
|
|
 bht-0068YO
MY1016 24 Volt, 250 Watt, 2650 RPM, 13.7 Amp, permanent-magnet motor.
11
tooth sprocket for #25 chain.
12 gauge power leads with standard 1/4''
push-in connectors.
Mounting bracket measures 4-1/2'' x 2-1/8'' with 4
threaded mounting holes.
|
|
1PCS 35$
|
|
10-50 PCS 28$
|
|
-100PCS 22$
|
|
+100PCS
15$
|
|
|
 bht-00110YO
MY1016Z3 24 Volt, 350 Watt, 3000 RPM, 18.7 Amp, permanent-magnet motor.
9
tooth sprocket for 1/2'' x 1/8'' pitch chain.
12 gauge power leads.
Gear
Ratio: 88:9 (9.778)
|
|
1PCS 60$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00YO
MY1016 24 Volt, 350 Watt, 2650 RPM, 19.2 Amp, permanent-magnet motor.11 tooth sprocket for #25 chain.`
12 gauge power leads with standard 1/4''
push-in connectors.
Mounting bracket measures 4-1/2'' x 2-1/8'' with 4
threaded mounting holes.
|
|
1PCS 28$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
bht-00YO
MY1016 36 Volt, 350 Watt, 2500 RPM, 11.5 Amp, permanent-magnet motor.
11
tooth sprocket for #25 chain.
12 gauge power leads with standard 1/4''
push-in connectors.
Mounting bracket measures 4-1/2'' x 2-1/8'' with 4
threaded mounting holes.
|
|
1PCS 45$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00110YO
MY1018Z 24
Volt, 450 Watt, 3000 RPM, 24.0 Amp, permanent-magnet motor.
9 tooth sprocket
for 1/2'' x 1/8'' pitch chain.
12 gauge power leads
Gear Ratio: 79:11
(7.182)
|
|
1PCS 60$
|
|
10-50 PCS 39$
|
|
-100PCS 28$
|
|
+100PCS
22$
|
|
|
 bht-00110
MY1020 24 Volt, 500 Watt, 2500 RPM, 27.4 Amp, permanent-magnet motor.
11
tooth sprocket for #25 chain.
12 gauge power leads
Motor Dimensions:
4-1/4'' W x 5-1/2'' L not including shaft. 4-1/4'' W x 6-1/2'' L including
shaft.
|
|
1PCS 56$
|
|
10-50 PCS 36$
|
|
-100PCS 26$
|
|
+100PCS
20$
|
|
|
 bht-00YO
|
|
1PCS 60$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00YO
6MY1020Z3 36 Volt, 600 Watt, 3300 RPM Non-Gear Reduced / 480 RPM Gear
Reduced, 21.3 Amp, permanent-magnet motor.
10 tooth sprocket for #420
chains.
12 gauge power leads.
Gear Ratio: 60:9 (6.67)
Mounting bracket
measures 4-3/4'' x 2-7/8'' with 4 mounting holes.
Mounting holes 4'' center
to center across and 2-1/4'' center to center across
|
|
1PCS 80$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
Scooter Drive Axle : A Reduction Axle (800W)
|
|
1PCS
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
Wheelchair Driver : Mini
Driver
|
|
1PCS
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
Trike Refit Motor : Brushless Differential
|
|
1PCS
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00YO
Front rim with 3 curved spokes designed for use with all 12-1/2'' tires.
Features
Accepts all 12-1/2'' tires and tubes.
Designed
for use with the 6001Z bearings.
|
|
1PCS 12$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-004a5YO
Clutch / Free Wheel
Outer
Diameter: 3 inches
Inner Diameter: 1-3/8 inches
|
|
1PCS 4$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
1,5$
|
|
|
 bht-004aYO
16 Tooth
Sprocket / Freewheel
This 16 tooth sprocket / freewheel is suited for use
with 1/2'' x 1/8'' pitch bicycle chain.
Fits all 1-3/8 inch outer diameter
scooter and bike threaded wheel hubs.
Outer Diameter: 2-3/4 inches
Inner
Diameter: 1-3/8 inches
|
|
1PCS 7$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
1,5$
|
|
|
 bht-00
CT-900D Controller for Sea Scooter (12 Volt)
Rated
Voltage: 12 Volts
Maximum Current: 12 Amps
Usable Motor: 90 - 200
Watts
Under Voltage Protection: 10.0 Volts
Suitable for Electric Charger ≤
1.0 Amps s.
|
|
1PCS 10$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-0068YO
Operating
Range:12 ~ 14.4 Volts
Current Range: 3.8 ~ 13.8 Amps
Speed (RPM): 17600 (At Max Efficency)
Output:
198.81 Watts
Motor Length: 3-15/16'' / 100 mm
Motor
Diameter: 1-11/16'' / 42 mm
Motor Shaft Length: 13/16'' / 20mm
Motor Shaft Diameter: 3/16'' / 5mm
|
200 Watt - 12 Volt Sea Scooter Motor
|
1PCS 40$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00aYO
4-1/2'' aluminum rear rim
Features
Accepts all 9'' x 3.5'' x
4'' tires and tubes.
Dual threaded rear hub for freewheel and band
brake.
Two piece split rim design.
Designed for use with the 6000Z
bearings.
|
4-1/2 in. Aluminum Rear Rim
|
1PCS 14$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-00aYO
4-1/2 in. Aluminum Front Rim
4-1/2'' aluminum front rim
Features
Accepts all 9'' x 3.5'' x 4'' tires and tubes.
Two
piece split rim design.
Designed for use with the 6000Z bearings.
|
4-1/2 in. Aluminum Front Rim
|
1PCS 14$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
  bht-0059YO
Front Wheel Assembly (Currie)
Includes rim, tire, tube, black band brake assembly,
axle, and nut
Front wheel assembly for Razor
Includes rim,
3.00-4 tire and tube, & bearings.
|
|
1PCS 33$
|
|
5-50 PCS 28$
|
|
-100PCS 16$
|
|
+100PCS
12$
|
|
|
  bht-0074YO
Rear Wheel Assembly
Includes rim, tire, tube, black band brake assembly, chain sprocket,
axle, axle spacers and nut
3.00-4 Rear Wheel Assembly including 3.00-4 tire, 3.00-4 inner tube,
rear rim, #25 chain sprocket, and wheel bearings
|
|
1PCS 39$
|
|
5-50 PCS 29$
|
|
-100PCS 18$
|
|
+100PCS
15$$
|
|
|
 bht-0040YO
Front Wheel Assembly
12-1/2" x 2-1/4" complete rear wheel assembly with curved spokes
includes rim, tire, and tube. Axle, bearings, sprocket, and brake drum
not included.
|
|
1PCS 39$
|
|
20-50 PCS 18$
|
|
-100PCS 14$
|
|
+100PCS
10$
|
|
|
   bht-0055YO
Rear Wheel Assembly
12-1/2" x 2-1/4" complete rear wheel assembly with curved spokes
includes rim, tire, and tube. Axle, bearings, sprocket, and brake drum
not included.
|
|
1PCS 39$
|
|
20-50 PCS 26$
|
|
-100PCS 18$
|
|
+100PCS
12$
|
|
|
 bht-008YO
PAS 1:1
|
|
CAPTEUR PAS
24/36V 250/300W
|
|
|
|
|
|
+ 100PCS 3$
|
|
|
 bht-0035LAN
POIGNEE + GAUGE BATTERIE + BOUTON CLAXON
24/36V 250/300W
|
|
1PCS 35$
|
|
5-50 PCS 28$
|
|
-100PCS 14$
|
|
+ 100PCS 10$
|
|
|
 bht-0035aLAN
POIGNEE + GAUGE BATTERIE
24/36V 250/300W
|
|
1PCS 35$
|
|
5-50 PCS 28$
|
|
-100PCS 14$
|
|
+ 100PCS 10$
|
|
|
 bht-0016YO
Fits standard 7/8" OD handlebars and cable is approximately 50" long with
four push-in connectors.
Throttle has 3 LED indicator lights. One LED is
for power status and the other two LED indicator lights are for battery status.
|
|
1PCS 10$
|
|
5-50 PCS 8$
|
|
-100PCS 6$
|
|
+100PCS
4$
|
|
|
 bht-007aYO
|
|
|
|
5-50 PCS 9$
|
|
-100PCS 6$
|
|
+ 100PCS 5$
|
|
|
 bht-007YO
POIGNEE SIMPLE 24/36V 250/300W
|
|
|
|
|
|
 bht-00YO
CONTROLLEUR BRUSHLESS
24/36V 250/300W
|
|
1PCS 55$
|
|
5-50 PCS 44$
|
|
-100PCS 25$
|
|
+ 100PCS 19$
|
|
|
 bht-00YO
36v 500w controller has 8 connectors.Model YK31
|
|
|
 bht-0028
24 volt controller has 8 connectors.T2430 T3630D
|
|
1PCS 22$
|
|
5-50 PCS 16$
|
|
-100PCS 10$
|
|
+100PCS
6$
|
|
|
 bht-0026
24 volt controller has 8 connectors
|
|
1PCS 20$
|
|
5-50 PCS 16$
|
|
-100PCS 10$
|
|
+100PCS
6$
|
|
|
|
|
|
 bht-001200LAN
BATTERY LifEp04 36V 10A AVEC PORTE BAGAGE + FEU ARRIERE + EMPLACEMENT CONTROLLEUR
|
|
1PCS 499$
|
|
5-50 PCS 350$
|
|
-100PCS 299$
|
|
+ 100PCS 260$
|
|
|
 bht-0095YO
12 Volt / 12 Amp Hour
Length:151mm / 6''
Width: 99mm / 3-7/8''
Height:
94mm / 3-3/4''
Total Height (with terminals): 101mm / 4''
Weight: Approx. 4.25 kgs (9.37 lbs)
|
|
1PCS 25$
|
|
5-50 PCS 20$
|
|
-100PCS 18$
|
|
+100PCS
15$
|
|
|
 bht-0032YO
12 Volt / 4.5Amp Hour
Length:90mm / 3-1/2''
Width: 70mm / 2-3/4''
Height: 101mm / 4''
Total
Height (with terminals): 107mm / 4-1/4''
Weight: Approx. 1.72 kgs
(3.8 lbs)
|
|
1PCS 14$
|
|
5-50 PCS 12$
|
|
-100PCS 10$
|
|
+100PCS
6$
|
|
|
 bht-00110YO
12 Volt / 18 Amp Hour Length:181mm / 7-1/8''
Width: 76mm /
3''
Height: 168mm / 6-5/8''
Total Height (with terminals):
168mm / 6-5/8''
Weight: Approx. 6.5 kgs (14.32 lbs)
|
|
1PCS 60$
|
|
5-50 PCS 45$
|
|
-100PCS 35$
|
|
+100PCS
25$
|
|
|
 Front Axle
Axle Length: 5-3/4 in. (146mm)
Axle Diameter: 15/32 in. (12mm)
Axle
Thread Area: 3/4 in. (19mm)
|
 Rear Axle
Axle Length: 6-5/8 in. (168mm)
Axle Diameter: 15/32 in.
(12mm)`
Axle Thread Area: 3/4 in. (19mm)
|
|
1PCS 5$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
 bht-0035YO
36 48 Volt INLINE Charger FAN
COOLED
|
|
1PCS 40$
|
|
5-50 PCS
|
|
-100PCS
|
|
+100PCS
|
|
|
  bht-0025YO
24 36 48 Volt Charger
|
|
1PCS 25$
|
|
5-50 PCS 20$
|
|
-100PCS 10$
|
|
+100PCS
5$
|
|
Electric Bike Batteries
LiFePO4 and
LiMn2O4 battery has the characteristics of safety, high energy density, stable
discharge platform, long life and RoHS compliance etc. It is widely used in
E-bikes, E-motorcycles, EVs, tourist cars, golf carts, mower, fork-lifts, beach
cars, E-boats, and scooters etc. Custom design and manufacture is
available.
Battery Packs (LiFePO4)
Electric Motorcycle batteries
LiFePO4 and
LiMn2O4 battery has the characteristics of safety, high energy density, stable
discharge platform, long life and RoHS compliance etc. It is widely used in
E-bikes, E-motorcycles, EVs, tourist cars, golf carts, mower, fork-lifts, beach
cars, E-boats, and scooters etc. Custom design and manufacture is
available.
Cylindrical Battery cells
Long life
Under normal operation, lifespan of LiFePO4 battery is more than 1000
recharging cycles, while more than 800 cycles for LiMn2O4.
High
power
Light weight, small size, high capacity, high energy
density.
Safe and reliable
Materials and techniques provide
dual assurances to Real Force battery safety. We use safe materials of LiFePO4
and LiMn2O4 on the positive pole and aluminum foil as packing material for our
high power battery.
After series of safety test on over –charge,
over-discharge, short circuit, dropping, heating, crushing and nail penetration,
our battery has no explosion or combustion risk, which proves that the safety
performance of RealForce LiFePO4 and LiMn2O4 batteries completely meets and even
exceeds the international standard.
Low self discharge rate
The
battery is endurable with less than 3% self discharge rate every
month.
No memory effect
Battery can be charged or discharged at
anytime, and battery capacity won’t fall off even under multiple incomplete
discharges.
Consistency
We control the whole production process
and strictly follow the standard of ISO9001 quality control system; therefore,
our batteries perform consistently on internal resistance, discharge platform
and voltage holding.
Humanized design
Our light weight
batteries can be freely assembled and flexibly used. Customized battery size,
shape and capacity are available in accordance with customers’
demands.
Environment friendly
The product is environment
friendly, with no leakage, no exhaust emission during production and
usage.
Prismatic Battery Cells
Soft package
LiFePO4 and LiMn2O4 battery has the characteristics of safety, high energy
density, stable discharge platform, long life and RoHS compliance etc. It is
widely used in E-bikes, E-motorcycles, EVs, tourist cars, golf carts, mower,
fork-lifts, beach cars, E-boats, and scooters etc. Custom design and manufacture
is available.
Battery Packs (LiMn2O4)
LiFePO4 and
LiMn2O4 battery has the characteristics of safety, high energy density, stable
discharge platform, long life and RoHS compliance etc. It is widely used in
E-bikes, E-motorcycles, EVs, tourist cars, golf carts, mower, fork-lifts, beach
cars, E-boats, and scooters etc. Custom design and manufacture is
available.
PCM/BMS Series
PCM
PCM protects
against over-charge, over-discharge, over-current and short circuit, with
temperature control, equalizing charge and discharge control, as well as CMOS
chip control.
BMS
BMS, Battery
Management System is composed by color touch screen,
monitors,
Voltage &
temperature sampling modules and current sampling modules. It can test single
cell voltage, battery pack current and temperature.
Li-ion Battery Chargers
Real Force chargers introduce CC,
CV charging modules, advanced aluminum alloy case and liquid cooling fan which
help to speed up heat elimination.DS50 high frequency transformer on
circuit and double MOS tube parallel drive mode on main switch optimize the
circuit design. It completely solves the high working temperature of charger,
transformer and power tube, enhances safety and raises charging compatibility (
Charging efficiency is up to 85%).The adoption of internationally advanced SMT
chip production techniques make it realized to avoid man-made malfunctions
,improve shock-resistant performance of components and raise consistency and
reliability of products.
|
|
